by MikeJ | May 22, 2012 | News
Well, I said I would not update this “old” version of the site any more, but as I haven’t had time to bring up the nice new one yet completely, one more update is necessary. The Replay boards have now obtained FCC and CE approval and are starting to...
by MikeJ | Dec 19, 2011 | News
Well, I still haven’t got the new website up and running, but testing and shipping of the boards continues. I’m working through the list of people who have mailed me. I have a new Amiga core up and running based on Jakub’s latest work, but it’s...
by MikeJ | Oct 18, 2011 | News
Testing is going well, I have most of the boards assembled now. I am starting to mail people who have already contacted me, and then I will see how many boards are left. I am about to order some more, so there should be plenty available. The first core to be released...
by MikeJ | Oct 4, 2011 | News
Some of the new toys… Sorry for the lack of updates, still working on the new website. I’ll start taking orders for these later this week.
by MikeJ | Jun 30, 2011 | News
Ok, not quite the last post in the old website … I’ve just got back from another fantastic Glastonbury Festival, so it’s a bit of an effort to do, well, anything this week 🙂 I built one of the atx_pwr controller boards and it works nicely. Now my...
by MikeJ | Apr 12, 2011 | News
Oh, I nearly forgot – here is an overview of the base board and it’s connectors.
by MikeJ | Apr 12, 2011 | News
Prototype board production is continuing. All beta test boards are assembled and these have been shipping out over the past week or two. I’ve been in China and should get the production tweaked version as well as the atx-power control PCB manufactured shortly....
by MikeJ | Mar 9, 2011 | News
Here is a picture of the board in a mini-itx box. It’s the smallest case I could find and the Replay board takes up about 1/3rd. I need to make a small adapter board for the ATX PSU then the board can be powered by the rear 4 pin molex. The hardware is fully...
by MikeJ | Feb 3, 2011 | News
The first board was shipped out to another developer today! When we have a working initial firmware I will start shipping the rest of the boards. Please don’t email me yet!
by MikeJ | Feb 2, 2011 | News
The replacement regulators work well and solve the power off problem. I’ve been testing the luma trap response with burst test patterns generated in the FPGA. The hardware is working well, but I am starting to think the trap may not be worth it for...
by MikeJ | Dec 16, 2010 | News
A quick update, I apologize for the delay. I’ve been really busy testing the boards. No real problems as yet. I’m waiting for a different LDO as the one I am using does not shut down when the input power is turned off, and the resulting reverse leakage...
by MikeJ | Nov 16, 2010 | News
A few more pictures now I’ve assembled the through hole components. You can see one board does not have the components on the backside, this is the version without the composite/SVHS output. The board you can see from the top has the codec and the extra output...
by MikeJ | Nov 15, 2010 | News
The first 10 prototype boards came back today. I will post some more pictures after final assembly tomorrow.
by MikeJ | Oct 3, 2010 | News
Good news, the missing connector which was on 3 month lead time has finally arrived! The components are packed and shipped off to the production people for the prototype assembly. The paste mask needed for assembly has also arrived, so we are good to go. Hopefully I...
by MikeJ | Aug 31, 2010 | News
I’ll just sneak in a little update while it is still August 🙂 Well, late July didn’t happen never mind early July. All of Sweden seems to shut down during the summer, and getting a production slot has proved difficult. However, we are going ahead now. If...
by MikeJ | Jun 20, 2010 | News
No news at the moment, I am still waiting for an assembly slot. It looks like I’ll get the boards back early July. I’ll be out of contact for a few days, I’m off to Glastonbury music festival 🙂
by MikeJ | May 25, 2010 | News
Well, I made it back from China with the boards and a lot of the parts. Now I’m going through the pricing and starting to kit for assembly…. New connectors seem to fit ok 🙂
by MikeJ | May 5, 2010 | News
Tobias has updated the T80 core to add undocumented DDCB & FDCB instructions. You can find the new version (v303) on the Library page.
by MikeJ | Apr 6, 2010 | News
I have samples of the Chrontel DACs so I’ve decided to push on and build a few boards at least now. I’ve updated the schematic and layout drawings in the previous post and told the PCB house to re-process and complete the boards. Waiting for the components...
by MikeJ | Mar 29, 2010 | News
The RevB Replay PCB is waiting in China for some parts. For some reason a number of components are on two month lead time at the moment, which is a bit annoying. I’m trying to get samples of the missing parts so I can at least populate a few proto boards to test...
