<![CDATA[FPGA Arcade — Empty PFS3 hardfile set to start with]]> http://www.fpgaarcade.com/punbb/viewtopic.php?id=1085 Thu, 07 Feb 2019 12:34:30 +0000 PunBB <![CDATA[Re: Empty PFS3 hardfile set to start with]]> http://www.fpgaarcade.com/punbb/viewtopic.php?pid=11490#p11490 Hi yoli,

Some time has passed since I played with it. Not really sure whats going on there. All I can say, I had this message once, just after copying stuff on the partition. Then I started over from scratch and it never happened again.

You also find some Google hits on this, like this:
http://eab.abime.net/showthread.php?t=6 … ;styleid=4

What I would try:
take a second fresh copy of the boot hdf. boot you Workbench with both images attached, do a

> copy source:#? destination: all clone quiet

style copy command to copy all files to the fresh image

Thu, 07 Feb 2019 12:34:30 +0000 http://www.fpgaarcade.com/punbb/viewtopic.php?pid=11490#p11490
<![CDATA[Re: Empty PFS3 hardfile set to start with]]> http://www.fpgaarcade.com/punbb/viewtopic.php?pid=11489#p11489 @phluxx thanks for this! I have installed wb3.1 on the boot hd, problem though is when booting from the hdf there is an error related to pfs3 data1 partition "Rootblock extension invalid", "Disk update failed". The partition is still usable though. Is there a way to fix this?

Wed, 06 Feb 2019 17:26:35 +0000 http://www.fpgaarcade.com/punbb/viewtopic.php?pid=11489#p11489
<![CDATA[Re: Empty PFS3 hardfile set to start with]]> http://www.fpgaarcade.com/punbb/viewtopic.php?pid=8650#p8650 Amazing how much smaller that gets wink

I always thought, rar5 is even older than the default. Learned something again...

Sun, 07 Feb 2016 19:31:14 +0000 http://www.fpgaarcade.com/punbb/viewtopic.php?pid=8650#p8650
<![CDATA[Re: Empty PFS3 hardfile set to start with]]> http://www.fpgaarcade.com/punbb/viewtopic.php?pid=8649#p8649 Thanks guys i'll give it a blast. all attempts at getting a seconds ffs drive have failed on the arcade

Sun, 07 Feb 2016 15:20:08 +0000 http://www.fpgaarcade.com/punbb/viewtopic.php?pid=8649#p8649
<![CDATA[Re: Empty PFS3 hardfile set to start with]]> http://www.fpgaarcade.com/punbb/viewtopic.php?pid=8648#p8648 Re-compressed with RAR5 compression.

Sun, 07 Feb 2016 14:47:05 +0000 http://www.fpgaarcade.com/punbb/viewtopic.php?pid=8648#p8648
<![CDATA[Re: Empty PFS3 hardfile set to start with]]> http://www.fpgaarcade.com/punbb/viewtopic.php?pid=8647#p8647 Sorry, the rar exceeded this site's size limitations. But, feel free to upload it to any hosting site.

Sat, 06 Feb 2016 23:16:58 +0000 http://www.fpgaarcade.com/punbb/viewtopic.php?pid=8647#p8647
<![CDATA[Re: Empty PFS3 hardfile set to start with]]> http://www.fpgaarcade.com/punbb/viewtopic.php?pid=8646#p8646 That upload site is seriously nasty with links to virus sites

Sat, 06 Feb 2016 21:46:01 +0000 http://www.fpgaarcade.com/punbb/viewtopic.php?pid=8646#p8646
<![CDATA[Empty PFS3 hardfile set to start with]]> http://www.fpgaarcade.com/punbb/viewtopic.php?pid=8643#p8643 I made a pfs3 hardfile set as a clean starting point for Amiga Replay installations.

Partitions are made from scratch, I never copied any files in, so the only content should be the contained PFS3 handler (aio package) -> no copyright issues to expect.

Layout is as follows:

- ~200 MB FFS partition "work", bootable
- ~3800 MB PFS3 partition "data1"

- ~4000 MB PFS3 partition "data2"

Both files are created with UAE, size set to 4095MB, so this is probably around the most you can get on a FAT file system.
All partitions are formatted and empty, you can just start to copy your files in, install workbench etc.
(I tested that briefly on Replay, everything worked fine.)

PFS3 Buffers are set to 200, this is considered a good choice for big partitions on machines with medium ram size.
(Yes, I know, we have ram, but still, occupying 100KB ram (per disk?) for disk transfers should be enough)

Make sure to use the latest Replay firmware with '4G' fixes!


Sat, 06 Feb 2016 09:48:48 +0000 http://www.fpgaarcade.com/punbb/viewtopic.php?pid=8643#p8643