1

(13 replies, posted in Amiga)

@Optiroc:
We have tested our VGA to Scart with the FPGA Arcade successfully, and we're largely quicker than AKit for sending products (except for replay board since we're waiting a new batch from Mike smile ).

Thanks, Laurent and Franck
Amedia Computer

2

(1 replies, posted in Member introductions)

Hi Robert wink

Welcome here wink

Laurent and Franck
Amedia Computer

3

(4 replies, posted in Member introductions)

Hi  data.fux wink

Welcome here wink

Don't hesitate following the availability state of the boards.

Thanks, Laurent and Franck
Amedia Computer

4

(13 replies, posted in Amiga)

Hi wink

We also sell the kickstart rom for Amiga 1200 / 500 / 600 / 2000 / 3000 / 4000 and also those from Cloanto (serial number) for Mist and FPGA Arcade on our starter kit.

Thanks, Laurent and Franck
Amedia Computer

5

(6 replies, posted in Member introductions)

Welcome here wink

Another good programmer for help ??!! wink

Very interesting history you have, we hope you'll enjoy all the awesome work done by Mike, Jim, SpotUP, my partner Sheldon ...... smile

Thanks, Laurent and Franck
Amedia Computer

6

(5 replies, posted in Member introductions)

Welcome here great Fan !

Very large collection you have, you should open a museum in order people can see all your historical computers wink

Thanks, Laurent and Franck
Amedia Computer

7

(94 replies, posted in Amiga)

Hi wink

For WinUAE, in order to see the hardfile in HDToolBox, don't forget to change the device tooltype in the icon :
- Instead of scsi.device, use uaehf.device

On the contrary, on all FPGA clone, scsi.device must be used wink

Thanks, Laurent and Franck
Amedia Computer

8

(3 replies, posted in Member introductions)

Hi wink

Welcome on this forum smile

For informations, there is still some tickets available for the Amiga30 show in Neuss this weekend !

We'll be here with Sheldon with many Amiga products and presenting the FPGA Arcade wink

You can get a ticket HERE wink

Thanks, Laurent and Franck
Amedia Computer

9

(2 replies, posted in Member introductions)

Hi wink
Welcome on this forum wink

Thanks, Laurent and Franck
Amedia Computer

10

(1 replies, posted in News)

Hi Mike wink

Great to see news about shipping !

We hope you'll have a great weekend full of fun wink

Nice to see RTG is pretty much done, it will be very useful for Workbench application or RTG Games like Napalm wink

Here we'll be demonstrating the last new core in Belgium tomorrow (Belgium Amiga Club and C64 Club Meeting).

See you on next week wink

Thanks, Laurent and Franck
Amedia Computer

11

(7 replies, posted in General discussion)

Hi wink

64GB should not work on the FPGA Arcade since it's in not SDHC format, it's SDXC format.

Standard SD Slot recognizes up to 32GB, not more in general.

Thanks, Laurent and Franck
Amedia Computer

12

(1,708 replies, posted in Amiga)

Hi again smile

SlamTilt works well with 16MHz mode, but Pinball Illusions still crashes 3 / 4 seconds after choosing the table withe the same config.

Good Work wink

Thanks, Laurent and Franck
Amedia Computer

13

(1,708 replies, posted in Amiga)

Hi wink

No, I have tested with CPU 32MHz, Fast.

I'll try with 16MHz.

Thanks, Laurent and Franck
Amedia Computer

14

(1,708 replies, posted in Amiga)

Hi Mike,

Just have tested the new version (with firmware from 14 june 2015) and SlamTilt WHDLoad version does the same : white screen when we tried saving options or when launching a table.

Results are the same with ADF version or WHDLoad version here.

Thanks, Laurent and Franck
Amedia Computer

15

(13 replies, posted in Amiga)

Hi cunnpole smile

Some of our customers use the VGA to Scart we have at the shop wink

Thanks, Laurent and Franck
Amedia Computer

Hi wink
Thanks for your comment wink

Mike has done an awesome work until now smile

Laurent and Franck

Amedia Computer

17

(1,708 replies, posted in Amiga)

Hi Mike wink

Great news for RTG integration, this should ease the use of high resolution modes for Workbench 3.1 / 3.9 wink

Thanks, Laurent and Franck
Amedia Computer

18

(1,708 replies, posted in Amiga)

Hi Mike smile

New firmware available with speed improvements on SVN please ?

Thanks, Laurent and Franck
Amedia Computer

19

(14 replies, posted in General discussion)

Hi Mikael,

Effectively, all the core, bin and HDF files must ALWAYS be at the ROOT of the SD Card !

Only the ADF or other virtual floppy disk can be copied in drawers.

Thanks, Laurent and Franck
Amedia Computer

20

(14 replies, posted in General discussion)

@Mikael: you have the last firmware since we have flashed the board with SVN firmware before shipping (april 2015).

For displaying the version, simply powerup the board without SD card in it, it will display a window (and red screen behind) with the version number noticed.

First thing : try a VGA monitor instead of DVI.

Thanks, Laurent and Franck
Amedia Computer

21

(14 replies, posted in General discussion)

Hi Mikael,

Do you use the last Amiga core ?

Do you use a DVI / VGA adapter ?

Do you use a valid kickstart 3.1 rom file ?

Thanks, Laurent
Amedia Computer

22

(94 replies, posted in Amiga)

@AmigaOS:
You install it on FPGA Arcade as you install it on WinUAE or any Classic Amiga.

You need to copy all the CD on an empty bootable HDF file named DH0, in a special drawer caaled 'OS3.9CD' for example.

After downloading the Classic Workbench 3.9 HDF file, you have to add one assign in the startup-sequence of this HDF file, in order pointing the CD to the drawer 'OS3.9CD'.

After that, you start the modified Classic Workbench 3.9 HDF file.

N.B. : the two HDF files (DH0 and Classic Workbench 3.9) must be present at the installation.

After finishing installation, you should remove the Classic Workbench 3.9 HDF file for booting on your new one.

N.B. : you may have to modify the startup-sequence from the new installation with removing the patching of the scsi.device, in order to avoid a guru meditation.

Thanks, Laurent and Franck
Amedia Computer

Hi wink
Just send us a mail for order status : laurent@amedia-computer.com :=)

Thanks, Laurent and Franck
Amedia Computer

Hi wink

All is done and the package is ready for phluxx wink

Thanks, Laurent and Franck
Amedia Computer

25

(1,708 replies, posted in Amiga)

Hi Mike,

Two buttons joypad (Boomerang B432 and Amiga CD32 GamePad) are working just well with the last core and ini file.

Also, with RyS MKII DB9/USB adapter, we can play at OhNoMoreLemmings with two players : one PS/2 mouse and one USB mouse, but the original DB9 mouse doesn't work : one DB9 original mouse (fresh new one) only working in horizontal direction and the other in vertical direction only ??!!

Also, Battle Squadron still has some graphics glitches (tested for two players with two buttons joypads).

Thanks, Laurent
Amedia Computer